General Pool Repairs
General pool repairs including pipework, valves, motors, tiles, coping and structural faults, with dedicated pump, filter and leak services too.
Read moreHome/Services/Pool Leak Detection
Pool leak detection in Gqeberha (Port Elizabeth)
If the pool is losing more water than normal, the first question is whether it is a real leak, an equipment leak or simply evaporation. Pool Crew investigates abnormal water loss and narrows the fault down before repair work starts.
Find the water loss before it becomes a bigger repair
What pool leak detection actually involves
Wind and warm weather can make evaporation noticeable in Gqeberha, so we do not start by breaking paving. A simple bucket comparison can help separate evaporation from a genuine loss, after which we inspect the equipment pad, visible plumbing, fittings and pool shell for clues.
If the evidence points to plumbing, suction and return lines can be tested more directly. Air entering the system can also look like a pump problem, while a leaking multiport valve or filter fitting may require filter repair. The important thing is to identify the fault before quoting the repair.
Once the location or system is identified, we can handle the next step through our general pool repairs service. That keeps the diagnosis and repair connected, rather than paying one company to find the problem and another to start again.
What’s included
- Pool water-loss assessment
- Equipment and visible plumbing inspection
- Bucket-test guidance
- Suction and return line diagnosis
- Pressure testing where required
- Clear repair recommendation after the fault is identified
You probably need this if…
- The water level drops noticeably faster than expected
- You are topping up the pool far more often than normal
- There are damp patches, soft ground or unexplained wet areas near the pool or equipment
- The pump draws air or loses prime without an obvious cause
- Water appears around the filter, multiport valve, pump or pipework
- You want evidence before paving, decking or garden areas are disturbed
How it works
What happens when you call us
- 1
Confirm abnormal water loss
Compare likely evaporation with the pool's actual drop and review when the loss happens.
- 2
Inspect equipment and visible plumbing
Look for leaks, air entry, valve faults, fittings, shell cracks and other visible clues.
- 3
Targeted testing where required
Use pressure or line testing when the symptoms point to hidden suction or return plumbing.
- 4
Repair recommendation
Explain the likely fault, what needs opening or replacing, and the next repair step before work proceeds.
Questions
Pool Leak Detection, answered
How can I tell if water loss is a leak or evaporation?
A bucket test can help compare the pool's water drop with normal evaporation over the same period. It is a useful first check, but equipment and plumbing still need inspection if the pool is clearly losing more water.
Do you pressure test pool pipes?
Yes, where the symptoms justify it. We first rule out obvious equipment and visible leaks, then use more targeted testing when a hidden suction or return line is suspected.
Can you repair the leak after finding it?
In many cases, yes. Pool Crew also handles plumbing, equipment and general pool repairs, so we can quote the repair once the fault has been identified.
Also from Pool Crew
Other services
Get a quote for pool leak detection
Tell us about the pool — size, condition and what is going wrong — and we will come out and quote.